MANIPHARM/SD-UPE

APPLICATION

• MANIPHARM/SD-UPE is a multipurpose suction and delivery hose for conveying a wide range of chemicals and food products.
• Execution acc. to EN 12115:2011.
• Hose approved by the Institute Ineris, attestation nr. INERIS-16-AM-341, for use in Atex areas.

TEMPERATURE RANGE

• In accordance with EN 12115:2011.
• Resistance to steam up to +130°C for max. 30 minutes.

CONSTRUCTION

INNER TUBE

• UHMWPE (UPE – Ultra High Molecular Weight Polyethylene), light colour, smooth, with black antistatic (R ≤ 10⁶Ω) helical UHMWPE stripe.
• Compliance: FDA Standards, D.M. 21.03.73 and following amendments, Regulation EU n. 10/2011.

REINFORCEMENT

• High strength plies of synthetic cord.
• Embedded steel helix wire.
• Built-in copper wires on request.

COVER

• EPDM rubber (code 104N), black, antistatic (R ≤ 10⁶Ω), smooth, cloth finish, resistant to abrasion, ozone and weather.

SAFETY FACTOR

• ≥ 4 times working pressure up to DN 75 mm.
• ≥ 3 times working pressure over DN 75 mm.

ELECTRICAL PROPERTIES

• Electrical resistance through the hose wall: R <10⁹ Ω.
• Identification symbol::
  – Ω/T for version without copper wires.
  – M/T for version with copper wires.

MARKING

• Embossed tape according to EN 12115:2011, lengthwise.